Check Point HARMONY R81 - Configuring Compliance Policy Rules; Ensuring Alignment with the Deployed Profile

Configuring Compliance Policy Rules
R81 Harmony Endpoint Server Administration Guide|358
Configuring Compliance Policy Rules
For each Action in a rule, select an option, which defines the Action behavior. You can select a
predefined Action or select New to define a custom Action option.
Right-click an Action and select Edit or Edit Shared Action to change the Action behavior.
Changes to policy rules are enforced only after you install the policy.
Ensuring Alignment with the Deployed Profile
This action the Compliance policy makes sure that all installed components are running and
defines what happens if they are not running. The action options are:
Action Description
Inform if assigned Software
Blades are not running
Send a warning message if one or more Endpoint
Security components are not running.
Restrict if assigned Software
Blade are not running
Restrict network access if one or more Endpoint Security
components are not running.
Monitor if assigned Software
Blades are not running
Create log entries if one or more Endpoint Security
components are not running. No messages are sent.
Do not check if assigned
Software Blades are not
running
No check is made whether Endpoint Security
components are running.