Working with Advanced Actions in a Media Encryption & Port Protection Rule
R81 Harmony Endpoint Server Administration Guide|267
n
Temporarily - If a device is locked temporarily, users can try to authenticate again after a
specified time.
n
Permanently - If the device is locked permanently, it stays locked until an administrator
unlocks it.
Select one of these Actions to define if and when user accounts are locked:
Action Description
Do not lock out storage device
upon failed authentication.
Users are not locked out of a device if they try to log
on unsuccessfully. This setting is not recommended.
Temporarily lock storage device
upon failed authentication
attempts
After a configured amount of failed log on attempts
(the default is 5), the device is temporarily locked.
Permanently lock storage device
upon failed authentication
attempts
After a configured amount of failed log on attempts
(the default is 10), the device is permanently locked.
Right-click an Action to edit the properties. You can also create custom device Lock actions.
To Next Page