Chroma 62000P Series User Manual

Programmable DC Power Supply 62000P Series Operating & Programming Manual
NOTICE
Take example by 62012P-80-60:
1. If there are 5 sets connected in parallel and 80V/300A is set, the setting of each set is
80V/60A and the total output will be 80V/300A.
2. If there are 5 sets connected in series and 400V/15A is set, the setting of each set is
80V/15A and the total output will be 400V/15A.
3.3.3.3.4 Setting SLAVE
The SLAVE setting is shown below. When set MASTER OR SLAVE = SLAVE, a line
SLAVE ADDR. will prompt for setting.
1. Use “
”, “
” keys to move the cursor to MASTER OR SLAVE column.
[SE
R
IES/P A
R
A L L E L ]
M
A
S T E
R
& S L A V E C O N T
R
O
L=
YE
S
M A S T E R O
R
S L A
V
E=SLA
V
E
S L A VE
A
D D
R
. = 1
Figure 3-34
2. Use the numeric (
1
) keys or “Rotary” ( ) knob to set to SLAVE.
3. Press “
ENTER
” to confirm.
4. Press “
EXIT
” to return to MAIN PAGE.
3.3.3.3.5 Setting SLAVE ADDR.
When MASTER OR SLAVE = SLAVE, it has to set the SLAVE address as Figure 3-35
shows. If there is more than one SLAVE in use, then each SLAVE needs a different
address.
1. Use “
”, “
” keys to move the cursor to MASTER OR SLAVE column.
3-24

Chroma 62000P Series Specifications

General

Brand	Chroma
Model	62000P Series
Category	Power Supply
Language	English