CipherLab 2564

238
Enter Setup
2564 Barcode Scanner User Guide
6) Run the download utility “ProgLoad.exe” on your computer.
Kernel Program
User Program
2564CradleKV*.shx
2564CradleUV*.shx
 For the communication settings, select
“RS-232” and the correct COM port for
RS-232 or USB Virtual COM interface.
 For RS-232, select 115200 bps for baud
rate; for USB Virtual COM, ignore the baud
rate setting.
 For the file option, click [Browse] to select
the target file for firmware update.
 Click [OK].
7) The cradle will automatically restart itself when upgrading firmware is completed
successfully.
8) Read the “Update” barcode for the scanner to resume its operation (exit the
configuration mode).
Update