CipherLab 2564 User Manual

250
Enter Setup
2564 Barcode Scanner User Guide
EXAMPLE
KEY TYPE = NORMAL
For example, if you want to program the character “!” as the prefix code:
1.
Read the “Configure Prefix” barcode.
2.
Read the “Hexadecimal Value” barcode on page 252 for “2” and “1”.
3.
Read the “Validate” barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character “a” (= “1C” on the scan code table) as the
prefix code:
1.
Read the “Configure Prefix” barcode.
2.
Read the “Scan Code” barcode.
3.
Read the “Hexadecimal Value” barcode on page 252 for “1” and “C”.
4.
Read the “Validate” barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character “!” (= “Shift” + “1” on keyboard) as the prefix
code:
1.
Read the “Configure Prefix” barcode.
2.
Read the “Add Shift” barcode.
3.
Read the “Hexadecimal Value” barcode on page 252 for “3” and “1”.
4.
Read the “Validate” barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = CTRL
For example, if you want to program “Ctrl+A” and “Ctrl+$” as the prefix code:
1.
Read the “Configure Prefix” barcode.
2.
Read the “Add Left Ctrl” barcode.
3.
Read the “Hexadecimal Value” barcode on page 252 for “4”, “1” (= “A”).
4.
Read the “Add Left Ctrl” barcode.
5.
Read the “Hexadecimal Value” barcode on page 252 for “2”, “4” (= “$”).
6.
Read the “Validate” barcode to complete this setting.

CipherLab 2564 Specifications

General

Brand	CipherLab
Model	2564
Category	Barcode Reader
Language	English