83
Update
Chapter 2 Ошибка! Используйте вкладку "Главная" для применения Heading 1 к тексту, который должен здесь отображаться.
2.6 USB HID VIA BT CRADLE
For USB HID, use the USB cable to connect the scanner via cradle to the USB port of PC
and connect the power supply cord. Run any text editor on your computer, and the
scanned data will be transmitted to the computer.
Warning: When the cradle is solely on USB power, the provided current may be
insufficient for it to function normally. You must connect the power supply
cord.
To Next Page
Loading...
Need help?
General
