62
Enter Setup
2564 Barcode Scanner User Guide
2) Read the “Decimal Value” barcode on page 251. For example, read “1” and “0” for the
scanner to automatically shut down after being idle for 1 second.
3) Read the “Validate” barcode on the same page to complete this setting.
Note: We suggest enabling the error beep so that you will be notified of such data loss
and have the scanner re-read data.
2.2.4 BT SPP SLAVE HARDWARE FLOW CONTROL
By default, the data sending via Bluetooth SPP doesn’t employ hardware flow control. In
some cases users may want to enable hardware flow control to prevent data loss during
transmission. Please scan the barcode below to enable/disable it.
To Next Page
Loading...
Need help?
General
