140
Enter Setup
2564 Barcode Scanner User Guide
4.10.3 GS1 FORMATTING
Decide whether to enable GS1 formatting for GS1-128.
4.10.4 APPLICATION ID MARK
Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the “Hexadecimal System” barcode on page 252 for the desired character. Read
'00' if you want to remove the AI mark.
3) Read the “Validate” barcode to complete this setting.
To Next Page
Loading...
Need help?
General
