257
The scanner is capable of reading 2D driver’s licenses and other American Association of
Motor Vehicle Administrators (AAMVA) compliant ID cards. For compliant 2D licensed
card scanning, it decodes the information embedded in the ID cards to a formatted data.
This appendix provides the setup barcodes required while ScanMaster utility provides GUI
setup that is oganized and easy-to-use.
Note: The configured settings are saved in flash memory for access once a driver’s
license is read.
LICENSE PARSING SETUP
FILE TYPE
You can check the file type of ANSI by scanning the barcode as below.
To Next Page
Loading...
Need help?
General
