150
Enter Setup
2564 Barcode Scanner User Guide
4.16.5 FIELD SEPARATOR (GS CHARACTER)
Decide whether to apply a field separator (to convert the GS control character to human
readable character).
1) Read the barcode above to enable field separator.
2) Read the “Hexadecimal System” barcode on page 252 for the desired character
string.
3) Read the “Validate” barcode to complete this setting.
4.16.6 GS1 FORMATTING
Decide whether to enable GS1 formatting for GS1 DataBar (RSS family).
4.16.7 APPLICATION ID MARK
Decide whether to add an application ID mark (1 character) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the
GS1 data.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the “Hexadecimal System” barcode on page 252 for the desired character. Read
'00' if you want to remove the AI mark.
3) Read the “Validate” barcode to complete this setting.
To Next Page
Loading...
Need help?
General
