Cisco 2100 Series Configuration Guide

Contents
xxii
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Using the CLI to Configure Roaming and Real-Time Diagnostics D-31
Using the Debug Facility D-34
Configuring Wireless Sniffing D-39
Prerequisites for Wireless Sniffing D-39
Using the GUI to Configure Sniffing on an Access Point D-39
Using the CLI to Configure Sniffing on an Access Point D-41
Troubleshooting Access Points Using Telnet or SSH D-42
Debugging the Access Point Monitor Service D-43
Using the CLI to Debug Access Point Monitor Service Issues D-43
APPENDIX E Logical Connectivity Diagrams E-1
Cisco WiSM E-2
Cisco 28/37/38xx Integrated Services Router E-3
Catalyst 3750G Integrated Wireless LAN Controller Switch E-4
I NDEX

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)