D-3
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Appendix D Troubleshooting
System Messages
STATION_ASSOCIATE_FAIL Check load on the Cisco radio or signal quality
issues.
LRAD_ASSOCIATED The associated lightweight access point is now
managed by this controller.
LRAD_DISASSOCIATED The lightweight access point may have associated
to a different controller or may have become
completely unreachable.
LRAD_UP The lightweight access point is operational, no
action required.
LRAD_DOWN The lightweight access point may have a problem
or is administratively disabled.
LRADIF_UP Cisco radio is UP.
LRADIF_DOWN Cisco radio may have a problem or is
administratively disabled.
LRADIF_LOAD_PROFILE_FAILED Client density may have exceeded system
capacity.
LRADIF_NOISE_PROFILE_FAILED The non-802.11 noise has exceed configured
threshold.
LRADIF_INTERFERENCE_PROFILE_FAILED 802.11 interference has exceeded threshold on
channel -- check channel assignments.
LRADIF_COVERAGE_PROFILE_FAILED Possible coverage hole detected. Check the
lightweight access point history to see if it is a
common problem and add lightweight access
points if necessary.
LRADIF_LOAD_PROFILE_PASSED Load is now within threshold limits.
LRADIF_NOISE_PROFILE_PASSED Detected noise is now less than threshold.
LRADIF_INTERFERENCE_PROFILE_PASSED Detected interference is now less than threshold.
LRADIF_COVERAGE_PROFILE_PASSED Number of clients receiving poor signal are within
threshold.
LRADIF_CURRENT_TXPOWER_CHANGED Informational message.
LRADIF_CURRENT_CHANNEL_CHANGED Informational message.
LRADIF_RTS_THRESHOLD_CHANGED Informational message.
LRADIF_ED_THRESHOLD_CHANGED Informational message.
LRADIF_FRAGMENTATION_THRESHOLD_
CHANGED
Informational message.
RRM_DOT11_A_GROUPING_DONE Informational message.
RRM_DOT11_B_GROUPING_DONE Informational message.
ROGUE_AP_DETECTED May be a security issue.Use maps and trends to
investigate.
Table D-1 System Messages and Descriptions (continued)
Error Message Description