Cisco 2100 Series Configuration Guide

10-31
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 10 Managing User Accounts
Configuring Wired Guest Access
Step 13 To use a guest-LAN specific custom web configuration rather than a global custom web configuration,
enter this command:
config guest-lan custom-web global disable guest_lan_id
Note If you enter the config guest-lan custom-web global enable guest_lan_id command, the custom
web authentication configuration at the global level is used.
Step 14 To save your changes, enter this command:
save config
Note Information on the configured web authentication appears in both the show run-config and
show running-config commands.
Step 15 To display the customized web authentication settings for a specific guest LAN, enter this command:
show custom-web {all | guest-lan guest_lan_id}
Note If internal web authentication is configured, the Web Authentication Type displays as internal
rather than external (controller level) or customized (WLAN profile level).
Information similar to the following appears for the show custom-web all command:
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
Web Authentication Type............... External
External Web Authentication URL............ http:\\9.43.0.100\login.html
External Web Server list
Index IP Address
----- ---------------
1 9.43.0.100
2 0.0.0.0
3 0.0.0.0
4 0.0.0.0
5 0.0.0.0
...
20 0.0.0.0
Configuration Per Profile:
WLAN ID: 1
WLAN Status................................... Enabled
Web Security Policy........................... Web Based Authentication
Global Status................................. Disabled
WebAuth Type.................................. Customized
Login Page.................................... login1.html
Loginfailure page name....................... loginfailure1.html
Logout page name............................. logout1.html

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)