Cisco 2100 Series Configuration Guide

CHAPTER
3-1
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
3
Configuring Ports and Interfaces
This chapter describes the controller’s physical ports and interfaces and provides instructions for
configuring them. It contains these sections:
• Overview of Ports and Interfaces, page 3-2
• Configuring the Management, AP-Manager, Virtual, and Service-Port Interfaces, page 3-10
• Configuring Dynamic Interfaces, page 3-16
• Configuring Ports, page 3-19
• Enabling Link Aggregation, page 3-29
• Configuring a 4400 Series Controller to Support More Than 48 Access Points, page 3-34

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)