Cisco 2100 Series Configuration Guide

13-23
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
Chapter 13 Configuring Hybrid REAPWireless Device Access
Configuring Hybrid-REAP Groups
i. To specify the number of seconds for the PAC to remain viable, enter this command:
config hreap group group_name radius ap pac-timeout timeout
where timeout is a value between 2 and 4095 seconds (inclusive) or 0. A value of 0, which the default
value, disables the PAC timeout.
Step 5 To save your changes, enter this command:
save config
Step 6 To see the current list of hybrid-REAP groups, enter this command:
show hreap group summary
Information similar to the following appears:
HREAP Group Summary: Count 2
Group Name # Aps
Group 1 1
Group 2 1
Step 7 To see the details for a specific hybrid-REAP group, enter this command:
show hreap group detail group_name
Information similar to the following appears:
Number of Ap's in Group: 3
00:1d:45:12:f2:24 AP1240.EW3.f224 Joined
00:1d:45:12:f7:12 AP1240.10.f712 Joined
00:1d:a1:ed:9f:84 AP1131.23.9f84 Joined
Group Radius Servers Settings:
Primary Server Index............................ Disabled
Secondary Server Index.......................... Disabled
Group Radius AP Settings:
AP RADIUS server............ Enabled
EAP-FAST Auth............... Enabled
LEAP Auth................... Enabled
Server Key Auto Generated... No
Server Key.................. <hidden>
Authority ID................ 436973636f0000000000000000000000
Authority Info.............. Cisco A_ID
PAC Timeout................. 0
Number of User's in Group: 20
1cisco 2cisco
3cisco 4cisco
cisco test1
test10 test11
test12 test13
test14 test15
test2 test3
test4 test5
test6 test7
test8 test9

Cisco 2100 Series Specifications

General

Power over Ethernet (PoE)	No
Form Factor	Desktop
Encryption	AES, TKIP
Maximum Access Points	6
Security	WPA, WPA2, 802.1X
Dimensions	1.75 x 8.0 x 8.5 in. (4.4 x 20.3 x 21.6 cm)