Contents
xiv
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Enabling Root Guard 15-9
Enabling Loop Guard 15-9
Displaying the Spanning-Tree Status 15-10
CHAPTER
16 Configuring Resilient Ethernet Protocol 16-1
Understanding REP 16-1
Link Integrity 16-3
Fast Convergence 16-4
VLAN Load Balancing 16-4
Spanning Tree Interaction 16-6
REP Ports 16-6
Configuring REP 16-6
Default REP Configuration 16-7
REP Configuration Guidelines 16-7
Configuring the REP Administrative VLAN 16-8
Configuring REP Interfaces 16-9
Setting Manual Preemption for VLAN Load Balancing 16-13
Configuring SNMP Traps for REP 16-13
Monitoring REP 16-14
CHAPTER
17 Configuring Flex Links and the MAC Address-Table Move Update Feature 17-1
Understanding Flex Links and the MAC Address-Table Move Update 17-1
Flex Links 17-1
VLAN Flex Link Load Balancing and Support 17-2
Flex Link Multicast Fast Convergence 17-3
Learning the Other Flex Link Port as the mrouter Port 17-3
Generating IGMP Reports 17-3
Leaking IGMP Reports 17-4
MAC Address-Table Move Update 17-6
Configuring Flex Links and MAC Address-Table Move Update 17-7
Default Configuration 17-7
Configuration Guidelines 17-8
Configuring Flex Links 17-8
Configuring VLAN Load Balancing on Flex Links 17-10
Configuring the MAC Address-Table Move Update Feature 17-11
Monitoring Flex Links and the MAC Address-Table Move Update 17-13
To Next Page
Loading...
