Cisco 3845 - Security Bundle Router - Chapter 2: Messages and Recovery Procedures

Contents
xv
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
CHAPTER 18 Configuring IGMP Snooping 18-1
Understanding IGMP Snooping 18-1
IGMP Versions 18-2
Joining a Multicast Group 18-3
Leaving a Multicast Group 18-4
Immediate Leave 18-5
IGMP Configurable-Leave Timer 18-5
IGMP Report Suppression 18-5
Configuring IGMP Snooping 18-6
Default IGMP Snooping Configuration 18-6
Enabling or Disabling IGMP Snooping 18-6
Configuring a Multicast Router Port 18-7
Configuring a Host Statically to Join a Group 18-8
Enabling IGMP Immediate Leave 18-8
Configuring the IGMP Leave Timer 18-9
Configuring TCN-Related Commands 18-10
Controlling the Multicast Flooding Time After a TCN Event 18-10
Recovering from Flood Mode 18-10
Disabling Multicast Flooding During a TCN Event 18-11
Disabling IGMP Report Suppression 18-12
Displaying IGMP Snooping Information 18-12
Configuring IGMP Filtering and Throttling 18-13
Default IGMP Filtering and Throttling Configuration 18-14
Configuring IGMP Profiles 18-14
Applying IGMP Profiles 18-15
Setting the Maximum Number of IGMP Groups 18-16
Configuring the IGMP Throttling Action 18-17
Displaying IGMP Filtering and Throttling Configuration 18-18
CHAPTER 19 Configuring Traffic Control 19-1
Configuring Storm Control 19-1
Understanding Storm Control 19-1
Default Storm Control Configuration 19-3
Configuring Storm Control and Threshold Levels 19-3
Configuring Port Blocking 19-5
Default Port Blocking Configuration 19-5
Blocking Flooded Traffic on an Interface 19-5
Configuring EVC MAC Security 19-6