Contents
xvi
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Understanding MAC Security 19-7
Secure MAC Addresses 19-7
Security Violations 19-7
Default EVC MAC Security Configuration 19-8
MAC Address Security Guidelines 19-9
Enabling and Configuring EVC MAC Security 19-9
Displaying Traffic Control Settings 19-12
CHAPTER
20 Configuring CDP 20-1
Understanding CDP 20-1
Configuring CDP 20-2
Default CDP Configuration 20-2
Configuring the CDP Characteristics 20-2
Disabling and Enabling CDP 20-3
Disabling and Enabling CDP on an Interface 20-4
CDP and Ethernet Flow Points (EFPs) 20-4
Monitoring and Maintaining CDP 20-5
CHAPTER
21 Configuring LLDP and LLDP-MED 21-1
Understanding LLDP and LLDP-MED 21-1
Understanding LLDP 21-1
Understanding LLDP-MED 21-2
Configuring LLDP and LLDP-MED 21-3
Default LLDP Configuration 21-3
Configuring LLDP Characteristics 21-3
Disabling and Enabling LLDP Globally 21-4
Disabling and Enabling LLDP on an Interface 21-5
Configuring LLDP-MED TLVs 21-6
LLDP and Ethernet Flow Points (EFPs) 21-7
Monitoring and Maintaining LLDP and LLDP-MED 21-7
CHAPTER
22 Configuring UDLD 22-1
Understanding UDLD 22-1
Modes of Operation 22-1
Methods to Detect Unidirectional Links 22-2
Configuring UDLD 22-3
Default UDLD Configuration 22-4
Configuration Guidelines 22-4
Enabling UDLD Globally 22-5