Cisco 3845 - Security Bundle Router

Contents
xvii
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Enabling UDLD on an Interface 22-5
Resetting an Interface Disabled by UDLD 22-6
UDLD and Ethernet Flow Points (EFPs) 22-6
Displaying UDLD Status 22-7
CHAPTER 23 Configuring RMON 23-1
Understanding RMON 23-1
Configuring RMON 23-3
Default RMON Configuration 23-3
Configuring RMON Alarms and Events 23-3
Collecting Group History Statistics on an Interface 23-5
Collecting Group Ethernet Statistics on an Interface 23-5
Displaying RMON Status 23-6
CHAPTER 24 Configuring System Message Logging 24-1
Understanding System Message Logging 24-1
Configuring System Message Logging 24-2
System Log Message Format 24-2
Default System Message Logging Configuration 24-3
Disabling Message Logging 24-3
Setting the Message Display Destination Device 24-4
Synchronizing Log Messages 24-5
Enabling and Disabling Time Stamps on Log Messages 24-7
Enabling and Disabling Sequence Numbers in Log Messages 24-7
Defining the Message Severity Level 24-8
Limiting Syslog Messages Sent to the History Table and to SNMP 24-9
Enabling the Configuration-Change Logger 24-10
Configuring UNIX Syslog Servers 24-11
Logging Messages to a UNIX Syslog Daemon 24-11
Configuring the UNIX System Logging Facility 24-12
Displaying the Logging Configuration 24-13
CHAPTER 25 Configuring SNMP 25-1
Understanding SNMP 25-1
SNMP Versions 25-2
SNMP Manager Functions 25-3
SNMP Agent Functions 25-4
SNMP Community Strings 25-4
Using SNMP to Access MIB Variables 25-4