Cisco 3845 - Security Bundle Router

Contents
xviii
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
SNMP Notifications 25-5
SNMP ifIndex MIB Object Values 25-5
MIB Data Collection and Transfer 25-6
Configuring SNMP 25-6
Default SNMP Configuration 25-7
SNMP Configuration Guidelines 25-7
Disabling the SNMP Agent 25-8
Configuring Community Strings 25-8
Configuring SNMP Groups and Users 25-10
Configuring SNMP Notifications 25-12
Setting the CPU Threshold Notification Types and Values 25-16
Setting the Agent Contact and Location Information 25-17
Limiting TFTP Servers Used Through SNMP 25-17
Configuring MIB Data Collection and Transfer 25-18
Configuring the Cisco Process MIB CPU Threshold Table 25-20
SNMP Examples 25-21
Displaying SNMP Status 25-23
CHAPTER 26 Configuring Network Security with ACLs 26-1
Understanding ACLs 26-1
Supported ACLs 26-2
Port ACLs 26-3
Router ACLs 26-4
VLAN Maps 26-5
Handling Fragmented and Unfragmented Traffic 26-5
Configuring IPv4 ACLs 26-6
Creating Standard and Extended IPv4 ACLs 26-7
IPv4 Access List Numbers 26-8
ACL Logging 26-8
Creating a Numbered Standard ACL 26-9
Creating a Numbered Extended ACL 26-10
Resequencing ACEs in an ACL 26-14
Creating Named Standard and Extended ACLs 26-14
Using Time Ranges with ACLs 26-16
Including Comments in ACLs 26-18
Applying an IPv4 ACL to a Terminal Line 26-18
Applying an IPv4 ACL to an Interface 26-19
Hardware and Software Treatment of IP ACLs 26-20
Troubleshooting ACLs 26-21