Contents
xix
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
IPv4 ACL Configuration Examples 26-22
Numbered ACLs 26-23
Extended ACLs 26-23
Named ACLs 26-24
Time Range Applied to an IP ACL 26-24
Commented IP ACL Entries 26-25
ACL Logging 26-25
Creating Named MAC Extended ACLs 26-26
Applying a MAC ACL to a Layer 2 Interface 26-28
Configuring VLAN Maps 26-29
VLAN Map Configuration Guidelines 26-29
Creating a VLAN Map 26-30
Examples of ACLs and VLAN Maps 26-31
Applying a VLAN Map to a VLAN 26-33
Using VLAN Maps in Your Network 26-33
Wiring Closet Configuration 26-33
Denying Access to a Server on Another VLAN 26-34
Using VLAN Maps with Router ACLs 26-35
VLAN Maps and Router ACL Configuration Guidelines 26-36
Examples of Router ACLs and VLAN Maps Applied to VLANs 26-37
ACLs and Switched Packets 26-37
ACLs and Routed Packets 26-37
ACLs and Multicast Packets 26-38
Displaying IPv4 ACL Configuration 26-39
CHAPTER
27 Configuring QoS 27-1
Understanding QoS 27-2
Modular QoS CLI Configuration 27-3
Hierarchical QoS 27-4
Classification 27-5
The match Command 27-6
Classification Based on Layer 2 CoS 27-7
Classification Based on IP Precedence 27-7
Classification Based on IP DSCP 27-7
CoS Mapping 27-8
Ingress Classification Based on QoS ACLs 27-9
Classification Based on QoS Groups 27-10
Classification Based on Discard Class 27-11
Classification Based on VLAN IDs 27-11
To Next Page
Loading...
