Cisco 3845 - Security Bundle Router - Page 24

Contents
xxiv
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
User Interface for ARP 29-85
User Interface for PING 29-85
User Interface for SNMP 29-85
User Interface for HSRP 29-85
User Interface for Syslog 29-86
User Interface for Traceroute 29-86
User Interface for FTP and TFTP 29-86
Configuring a VPN Routing Session 29-87
Configuring BGP PE to CE Routing Sessions 29-88
Multi-VRF CE Configuration Example 29-88
Displaying Multi-VRF CE Status 29-92
Configuring Protocol-Independent Features 29-93
Configuring Cisco Express Forwarding 29-93
Configuring the Number of Equal-Cost Routing Paths 29-94
Configuring Static Unicast Routes 29-95
Specifying Default Routes and Networks 29-96
Using Route Maps to Redistribute Routing Information 29-97
Filtering Routing Information 29-100
Setting Passive Interfaces 29-101
Controlling Advertising and Processing in Routing Updates 29-101
Filtering Sources of Routing Information 29-102
Managing Authentication Keys 29-103
Monitoring and Maintaining the IP Network 29-104
CHAPTER 30 Configuring HSRP 30-1
Understanding HSRP 30-1
HSRP Versions 30-3
Multiple HSRP 30-4
Configuring HSRP 30-5
Default HSRP Configuration 30-5
HSRP Configuration Guidelines 30-5
Enabling HSRP 30-6
Configuring HSRP Priority 30-7
Configuring MHSRP 30-9
Configuring HSRP Authentication and Timers 30-10
Enabling HSRP Support for ICMP Redirect Messages 30-11
Displaying HSRP Configurations 30-11