Contents
xxv
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
CHAPTER
31 Configuring Cisco IOS IP SLAs Operations 31-1
Understanding Cisco IOS IP SLAs 31-1
Using Cisco IOS IP SLAs to Measure Network Performance 31-2
IP SLAs Responder and IP SLAs Control Protocol 31-3
Response Time Computation for IP SLAs 31-4
IP SLAs Operation Scheduling 31-5
IP SLAs Operation Threshold Monitoring 31-5
Configuring IP SLAs Operations 31-6
Default Configuration 31-6
Configuration Guidelines 31-6
Configuring the IP SLAs Responder 31-7
Analyzing IP Service Levels by Using the UDP Jitter Operation 31-8
Analyzing IP Service Levels by Using the ICMP Echo Operation 31-10
Monitoring IP SLAs Operations 31-12
CHAPTER
32 Configuring Ethernet OAM, CFM, and E-LMI 32-1
Understanding Ethernet CFM 32-1
CFM Domain 32-2
Maintenance Associations and Maintenance Points 32-3
CFM Messages 32-4
Crosscheck Function and Static Remote MEPs 32-5
SNMP Traps and Fault Alarms 32-5
Configuration Error List 32-5
IP SLAs Support for CFM 32-6
Configuring Ethernet CFM 32-6
Default Ethernet CFM Configuration 32-6
Ethernet CFM Configuration Guidelines 32-7
Configuring the CFM Domain 32-7
Configuring Ethernet CFM Crosscheck 32-10
Configuring Static Remote MEP 32-11
Configuring a Port MEP 32-13
Configuring SNMP Traps 32-14
Configuring Fault Alarms 32-15
Configuring IP SLAs CFM Operation 32-16
Manually Configuring an IP SLAs CFM Probe or Jitter Operation 32-16
Configuring an IP SLAs Operation with Endpoint Discovery 32-18
Managing and Displaying Ethernet CFM Information 32-20
Understanding the Ethernet OAM Protocol 32-22
OAM Features 32-23