Cisco 3845 - Security Bundle Router - Page 26

Contents
xxvi
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
OAM Messages 32-23
Setting Up and Configuring Ethernet OAM 32-24
Default Ethernet OAM Configuration 32-24
Ethernet OAM Configuration Guidelines 32-24
Enabling Ethernet OAM on an Interface 32-24
Enabling Ethernet OAM Remote Loopback 32-25
Configuring Ethernet OAM Link Monitoring 32-26
Configuring Ethernet OAM Remote Failure Indications 32-29
Configuring Ethernet OAM Templates 32-29
Displaying Ethernet OAM Protocol Information 32-32
Understanding E-LMI 32-32
Configuring E-LMI 32-33
Default E-LMI Configuration 32-33
E-LMI Configuration Guidelines 32-33
Enabling E-LMI 32-34
Customer-Edge Device Configuration 32-35
Displaying E-LMI 32-35
Ethernet CFM and Ethernet OAM Interaction 32-35
Enabling Ethernet OAM 32-36
Ethernet OAM and CFM Configuration Example 32-36
CHAPTER 33 Configuring IP Multicast Routing 33-1
Understanding Cisco’s Implementation of IP Multicast Routing 33-1
Understanding IGMP 33-2
IGMP Version 1 33-3
IGMP Version 2 33-3
Understanding PIM 33-3
PIM Versions 33-3
PIM Modes 33-4
PIM Stub Routing 33-5
IGMP Helper 33-5
Auto-RP 33-6
Bootstrap Router 33-6
Multicast Forwarding and Reverse Path Check 33-7
Configuring IP Multicast Routing 33-8
Default Multicast Routing Configuration 33-8
Multicast Routing Configuration Guidelines 33-9
PIMv1 and PIMv2 Interoperability 33-9
Auto-RP and BSR Configuration Guidelines 33-10