Contents
xxvii
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Configuring Basic Multicast Routing 33-10
Configuring PIM Stub Routing 33-12
PIM Stub Routing Configuration Guidelines 33-12
Enabling PIM Stub Routing 33-12
Configuring Source-Specific Multicast 33-13
SSM Components Overview 33-13
How SSM Differs from Internet Standard Multicast 33-14
SSM IP Address Range 33-14
SSM Operations 33-14
IGMPv3 Host Signalling 33-15
Configuration Guidelines 33-15
Configuring SSM 33-16
Monitoring SSM 33-16
Configuring Source Specific Multicast Mapping 33-16
Configuration Guidelines and Restrictions 33-17
SSM Mapping Overview 33-17
Configuring SSM Mapping 33-19
Monitoring SSM Mapping 33-21
Configuring a Rendezvous Point 33-22
Manually Assigning an RP to Multicast Groups 33-22
Configuring Auto-RP 33-23
Configuring PIMv2 BSR 33-27
Using Auto-RP and a BSR 33-31
Monitoring the RP Mapping Information 33-32
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 33-32
Configuring Advanced PIM Features 33-33
Understanding PIM Shared Tree and Source Tree 33-33
Delaying the Use of PIM Shortest-Path Tree 33-34
Modifying the PIM Router-Query Message Interval 33-35
Configuring Optional IGMP Features 33-36
Default IGMP Configuration 33-36
Configuring the Switch as a Member of a Group 33-36
Controlling Access to IP Multicast Groups 33-37
Changing the IGMP Version 33-38
Modifying the IGMP Host-Query Message Interval 33-39
Changing the IGMP Query Timeout for IGMPv2 33-39
Changing the Maximum Query Response Time for IGMPv2 33-40
Configuring the Switch as a Statically Connected Member 33-41
Configuring Optional Multicast Routing Features 33-41
To Next Page
Loading...
