Cisco 3845 - Security Bundle Router Software Guide

34-52
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 34 Configuring MPLS, MPLS VPN, MPLS OAM, and EoMPLS
Configuring MPLS OAM and IP SLAs MPLS
Step 9
reply-dscp-bits dscp-value (Optional) Specify the differentiated services codepoint (DSCP)
value for an echo reply packet of an IP SLAs operation. The
default value is 0.
Step 10
reply-mode {ipv4 | router-alert} (Optional) Specify the IP SLAs echo request reply mode as ipv4
or router-alert. The default is IPv4 UDP packet.
Step 11
request-data-size bytes (Optional) Specify the protocol data size for an IP SLAs request
packet. The range is 100 to 1500; the default is 100 bytes.
Step 12
scan-interval minutes (Optional) Specifies the time interval (in minutes) at which the
LSP Health Monitor checks the scan queue for BGP next hop
neighbor updates. The range is 1 to 70560; the default is 240
minutes.
Step 13
secondary-frequency {connection-loss |
timeout} frequency
(Optional) Set the secondary frequency (faster measurement
frequency) to which an IP SLAs operation should change when
a reaction condition occurs. The frequency range is 1 to 604800.
Step 14
tag text (Optional) Create a user-specified identifier for an IP SLAs
operation.
Step 15
threshold milliseconds (Optional) Specify the rising threshold (hysteresis) that
generates a reaction event and stores history information for an
IP SLAs operation. The range is 0 to 2147483647; the default
is 5000 ms.
Step 16
timeout milliseconds (Optional) Specify the amount of time that the IP SLAs
operation waits for a response from its request packet. The range
is 0 to 604800000; the default value is 5000 ms.
Step 17
ttl time-to-live (Optional) Specify the maximum hop count for an IP SLAs echo
request packet. The range is 1 to 255.
Step 18
exit Exit IP SLAs MPLS LSP monitor path discover configuration
mode and return to auto IP SLA MPLS parameter configuration
mode.
Step 19
exit Exit auto IP SLA MPLS parameter configuration mode and
returns to global configuration mode.
Command Purpose

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English