Index
IN-22
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
default configuration 34-45
described 34-42
MPLS Operations, Administration, and Maintenance
See MPLS OAM
MPLS traffic engineering
See MPLS TE
MQC
defined 27-1
steps to configure 27-3
mrouter port 17-3, 17-5
MSTP
boundary ports
configuration guidelines 14-15
described 14-6
BPDU filtering
described 15-3
enabling 15-7
BPDU guard
described 15-2
enabling 15-6
CIST, described 14-3
CIST regional root
CIST root 14-5
configuration guidelines 14-15, 15-5
configuring
forward-delay time 14-23
hello time 14-23
link type for rapid convergence 14-25
maximum aging time 14-24
maximum hop count 14-24
MST region 14-16
neighbor type 14-26
path cost 14-21
port priority 14-19
root switch 14-17
secondary root switch 14-18
switch priority 14-22
CST
defined 14-3
operations between regions 14-3
default configuration 14-14
default optional feature configuration 15-5
displaying status 14-27
enabling the mode 14-16
EtherChannel guard
described 15-3
enabling 15-8
extended system ID
effects on root switch 14-17
effects on secondary root switch 14-18
unexpected behavior 14-17
IEEE 802.1s
implementation 14-6
port role naming change 14-6
instances supported 13-9
interface state, blocking to forwarding 15-2
interoperability and compatibility among
modes
13-10
interoperability with 802.1D
described 14-8
restarting migration process 14-26
IST
defined 14-2
master 14-3
operations within a region 14-3
loop guard
described 15-4
enabling 15-9
mapping VLANs to MST instance 14-16
MST region
CIST 14-3
configuring 14-16
described 14-2
hop-count mechanism 14-5
IST 14-2
supported spanning-tree instances 14-2
optional features supported 1-5
overview 14-2
To Next Page
Loading...
