Index
IN-23
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Port Fast
described 15-2
enabling 15-5
preventing root switch selection 15-3
root guard
described 15-3
enabling 15-9
root switch
configuring 14-17
effects of extended system ID 14-17
unexpected behavior 14-17
shutdown Port Fast-enabled port 15-2
status, displaying 14-27
multicast groups
Immediate Leave 18-5
leaving 18-4
static joins 18-8
multicast packets
ACLs on 26-38
blocking 19-6
multicast router interfaces, monitoring 18-13
multicast router ports, adding 18-7
multicast storm 19-1
multicast storm-control command 19-4
multioperations scheduling, IP SLAs 31-5
Multiple HSRP
See MHSRP
multiple VPN routing/forwarding in customer edge
devices
See multi-VRF CE
multiprotocol label switching
See MPLS
multi-VRF CE
configuration example 29-88
configuration guidelines 29-82
configuring 29-82
default configuration 29-82
defined 29-80
displaying 29-92
monitoring 29-92
network components 29-82
packet-forwarding process 29-82
support for 1-8
N
named IPv4 ACLs 26-14
NameSpace Mapper
See NSM
native VLAN
configuring 10-13
default 10-13
neighbor discovery/recovery, EIGRP 29-34
neighbor offset numbers, REP 16-4
neighbors, BGP 29-55
network clock
setting 6-9
network clock selection 6-6
network management
CDP 20-1
RMON 23-1
SNMP 25-1
network node interface
See NNI
network performance, measuring with IP SLAs 31-2
network policy TLV 21-6
Network Time Protocol
See NTP
no commands 2-4
non-IP traffic filtering 26-26
Nonstop Forwarding Awareness
See NSF Awareness
nontrunking mode 10-10
normal-range VLANs
characteristics 10-3
configuring 10-5
defined 10-1
no switchport command 9-3
To Next Page
Loading...
