Index
IN-28
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
authentication 8-22
authorization 8-26
communication, global 8-20, 8-28
communication, per-server 8-20
multiple UDP ports 8-20
default configuration 8-20
defining AAA server groups 8-24
displaying the configuration 8-30
identifying the server 8-20
limiting the services to the user 8-26
method list, defined 8-19
operation of 8-19
overview 8-17
server load balancing 8-30
suggested network environments 8-18
support for 1-6
tracking services accessed by user 8-27
range
macro 9-8
of interfaces 9-7
rapid convergence 14-9
rapid per-VLAN spanning-tree plus
See rapid PVST+
rapid PVST+
802.1Q trunking interoperability 13-10
described 13-9
instances supported 13-9
Rapid Spanning Tree Protocol
See RSTP
RARP 29-7
RCP
configuration files
downloading B-17
overview B-15
preparing the server B-16
uploading B-18
image files
deleting old image B-35
downloading B-33
preparing the server B-32
uploading B-35
redundancy
EtherChannel 28-3
HSRP 30-1
pseudowire 34-37
STP
backbone 13-7
path cost 10-15
port priority 10-14
redundant peer 34-39
redundant pseudowires 34-38
reference clocks 6-1
reliable transport protocol, EIGRP 29-34
reloading software 3-21
Remote Authentication Dial-In User Service
See RADIUS
Remote Copy Protocol
See RCP
remote failure indications 32-23
remote failure indications, Ethernet OAM 32-29
remote loopback, Ethernet OAM 32-23, 32-25
Remote Network Monitoring
See RMON
REP
administrative VLAN 16-8
administrative VLAN, configuring 16-8
age timer 16-8
and STP 16-6
configuration guidelines 16-7
configuring interfaces 16-9
configuring SyncE workaround 6-10
convergence 16-4
default configuration 16-7
for timing loop prevention 6-3
manual preemption, configuring 16-13
monitoring 16-14
neighbor offset numbers 16-4
open segment 16-2
To Next Page
Loading...
