Index
IN-32
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
SNMPv2C 25-2
SNMPv3 25-2
snooping, IGMP 18-1
software images
location in flash B-23
scheduling reloads 3-22
tar file format, described B-24
source addresses, in IPv4 ACLs 26-11
source-and-destination-IP address based forwarding,
EtherChannel
28-7
source-and-destination MAC address forwarding,
EtherChannel
28-7
source-IP address based forwarding, EtherChannel 28-7
source-MAC address forwarding, EtherChannel 28-6
Source-specific multicast
See SSM
spanning tree and native VLANs 10-10
Spanning Tree Protocol
See STP
speed, configuring on interfaces 9-14
split-horizon group 11-6
split-horizons on bridge domains 11-6
SSH
configuring 8-37
cryptographic software image 8-36
described 1-4, 8-36
encryption methods 8-36
user authentication methods, supported 8-36
SSM
address management restrictions 33-15
CGMP limitations 33-15
components 33-13
configuration guidelines 33-15
configuring 33-13, 33-16
differs from Internet standard multicast 33-14
IGMP snooping 33-15
IGMPv3 33-13
IGMPv3 Host Signalling 33-15
IP address range 33-14
monitoring 33-16
operations 33-14
PIM 33-13
state maintenance limitations 33-16
SSM mapping
configuration guidelines 33-17
configuring 33-16, 33-19
defined 33-16
DNS-based 33-18, 33-20
monitoring 33-21
overview 33-17
restrictions 33-17
static 33-18, 33-19
static traffic forwarding 33-21
standby ip command 30-6
standby links 17-2
standby router 30-1
standby timers, HSRP 30-10
startup configuration
booting
manually 3-19
specific image 3-19
clearing B-19
configuration file
automatically downloading 3-18
specifying the filename 3-18
default boot configuration 3-18
static access ports
assigning to VLAN 10-8
defined 9-3, 10-4
static addresses
See addresses
static IP routing 1-8
static routes, configuring 29-95
static routing 29-2
static SSM mapping 33-18, 33-19
static traffic forwarding 33-21
static VLAN membership 10-2
statistics