Cisco 3845 - Security Bundle Router - Page 949

Index
IN-33
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
CDP 20-5
interface 9-22
IP multicast routing 33-45
LLDP 21-7
LLDP-MED 21-7
OSPF 29-33
RMON group Ethernet 23-5
RMON group history 23-5
SNMP input and output 25-23
statistics for policy maps 27-58
storm control
configuring 19-3
described 19-1
disabling 19-5
displaying 19-12
support for 1-2
STP
and REP 16-6
BPDU filtering
described 15-3
disabling 15-8
enabling 15-7
BPDU guard
described 15-2
disabling 15-7
enabling 15-6
BPDU message exchange 13-2
configuration guidelines 13-11, 15-5
configuring
forward-delay time 13-21
hello time 13-20
maximum aging time 13-21
path cost 13-18
port priority 13-16
root switch 13-14
secondary root switch 13-15
spanning-tree mode 13-12
switch priority 13-19
counters, clearing 13-22
default configuration 13-11
default optional feature configuration 15-5
designated port, defined 13-3
designated switch, defined 13-3
disabling 13-13
displaying status 13-22
EtherChannel guard
described 15-3
disabling 15-9
enabling 15-8
extended system ID
effects on root switch 13-14
effects on the secondary root switch 13-15
overview 13-3
unexpected behavior 13-14
features supported 1-5
IEEE 802.1D and bridge ID 13-3
IEEE 802.1D and multicast addresses 13-8
IEEE 802.1t and VLAN identifier 13-4
inferior BPDU 13-3
instances supported 13-9
interface state, blocking to forwarding 15-2
interface states
blocking 13-5
disabled 13-6
forwarding 13-5, 13-6
learning 13-6
listening 13-6
overview 13-4
interoperability and compatibility among
modes
13-10
keepalive messages 13-2
limitations with 802.1Q trunks 13-10
load sharing
overview 10-14
using path costs 10-15
using port priorities 10-14
loop guard
described 15-4