Index
IN-34
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
enabling 15-9
modes supported 13-9
multicast addresses, effect of 13-8
optional features supported 1-5
overview 13-2
path costs 10-15, 10-16
Port Fast
described 15-2
enabling 15-5
port priorities 10-15
preventing root switch selection 15-3
protocols supported 13-9
redundant connectivity 13-7
root guard
described 15-3
enabling 15-9
root port, defined 13-3
root switch
configuring 13-14
effects of extended system ID 13-3, 13-14
election 13-3
unexpected behavior 13-14
status, displaying 13-22
superior BPDU 13-3
timers, described 13-20
stratum, NTP 5-2
strict priority queuing
configuring 27-49
QoS 27-20
stub areas, OSPF 29-29
stub routing, EIGRP 29-39
subnet mask 29-4
subnet zero 29-5
summer time 5-13
SunNet Manager 1-3
supernet 29-5
SVIs
and IP unicast routing 29-2
and router ACLs 26-4
connecting VLANs 9-5
defined 9-4
routing between VLANs 10-2
switch console port 1-4
switched packets, ACLs on 26-37
switched ports 9-2
switchport backup interface 17-4, 17-5
switchport block multicast command 19-6
switchport block unicast command 19-6
switchport command 9-13
switch priority
MSTP 14-22
STP 13-19
switch software features 1-2
switch virtual interface
See SVI
SyncE
and copper ports 6-5
configuring the network clock 6-6
defaults 6-6
defined 6-1
monitoring 6-11
setting the network clock 6-9
synchronization, BGP 29-45
Synchronous Ethernet
See SyncE
syslog
See system message logging
system clock
configuring
daylight saving time 5-13
manually 5-11
summer time 5-13
time zones 5-12
displaying the time and date 5-12
overview 5-1
See also NTP
system message logging
default configuration 24-3
To Next Page
Loading...
