Cisco 7800 Series

Description and More InformationFeature
Supports narrowband and wideband ringtones. The feature makes the available ringtones
common with other Cisco IP Phones.
See Custom Phone Rings, on page 105.
Classic Ringtone
Enables a user to specify that a call relates to a specific client matter.
See Set Up Client Matter Codes, on page 146.
Client Matter Code (CMC)
Allows a user to talk simultaneously with multiple parties by calling each participant
individually. Conference features include Conference and Meet Me.
Allows a noninitiator in a standard (ad hoc) conference to add or remove participants; also
allows any conference participant to join together two standard conferences on the same line.
The Advance Adhoc Conference service parameter, disabled by default in Cisco Unified
Communications Manager Administration, allows you to enable these features.
Be sure to inform your users whether these features are
activated.
Note
Conference
Controls whether a call can be completed based on the CAL configuration in the Cisco Unified
Communications Manager.
When CAL is enabled, the user sees information about the call in a CAL message. The phone
displays the CAL message for the duration of the call. If a call fails due to an incompatible
CAL, the phone displays a failure message. You set up the failure message that the user sees.
Confidential Access Level (CAL)
Provides a method to control EEE functions on personal computer port and switch port by
enabling or disabling EEE. The feature controls both type of ports individually. The default
value is Enabled.
See Energy Efficient Ethernet for Port and Switch, Product Specific Configuration, on page
131.
Configurable Energy Efficient
Ethernet (EEE) for Port and Switch
Provides a configurable port range (2048 to 65535) for Real-Time Transport Protocol (RTP)
and secure Real-Time Transport Protocol (sRTP).
The default RTP and sRTP port range is 16384 to 32764.
You configure the RTP and sRTP port range in the SIP Profile.
See Set Up RTP/sRTP Port Range, on page 155.
Configurable RTP/sRTP Port Range
A computer telephony integration (CTI) route point can designate a virtual device to receive
multiple, simultaneous calls for application-controlled redirection.
CTI Applications
Provides end users with the ability to record their telephone calls via a softkey.
In addition administrators may continue to record telephone calls via the CTI User Interface.
See Device Invoked Recording, Product Specific Configuration, on page 131.
Device Invoked Recording
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
117
Telephony Features for the Cisco IP Phone