Cisco 7800 Series Administrator's Guide

Set Up Handset for 7811 108
Set Up Idle Display 108
Customize Dial Tone 109
CHAPTER 11 Phone Features and Setup 111
Cisco IP Phone User Support 111
Telephony Features for the Cisco IP Phone 112
Feature Buttons and Softkeys 127
Phone Feature Configuration 129
Set Up Phone Features for all Phones 130
Set Up Phone Features for a Group of Phones 130
Set Up Phone Features for a Single Phone 131
Product Specific Configuration 131
Feature Configuration Best Practices 143
High Call Volume Environments 143
Multiline Environments 143
Field: Always Use Prime Line 144
Set up Power Save 144
Set up EnergyWise 145
Set Up Client Matter Codes 146
Set Up Forced Authorization Codes 146
Set up AS-SIP 147
Set Up Do Not Disturb 148
Enable Agent Greeting 149
Set Up Monitoring and Recording 150
Set Up Call Forward Notification 150
Enable BLF for Call Lists 151
Set up Energy Efficient Ethernet 152
Enable Device Invoked Recording 152
UCR 2008 Setup 152
Set Up UCR 2008 in Common Device Configuration 153
Set Up UCR 2008 in Common Phone Profile 154
Set Up UCR 2008 in Enterprise Phone Configuration 154
Set Up UCR 2008 in Phone 154
Set Up RTP/sRTP Port Range 155
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
vii
Contents

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)