7
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Contents
Power Outage 6
Understanding Phone Configuration Files 6
SIP Dial Rules 8
Understanding the Phone Startup Process 8
Adding Phones to the Cisco Unified CallManager Database 12
Adding Phones with Auto-Registration 13
Adding Phones with Auto-Registration and TAPS 14
Adding Phones with Cisco Unified CallManager Administration 15
Adding Phones with BAT 16
Using Cisco Unified IP Phones with Different Protocols 16
Converting a New Phone from SCCP to SIP 17
Converting an In-Use Phone from SCCP to SIP 17
Converting an In-Use Phone from SIP to SCCP 18
Deploying a Phone in an SCCP and SIP Environment 18
Determining the MAC Address of a Cisco Unified IP Phone 19
CHAPTER
3 Setting Up the Cisco Unified IP Phone 1
Before You Begin 2
Network Requirements 2
Cisco Unified CallManager Configuration 3
Safety 3
Understanding the Cisco Unified IP Phone 7906G and 7911G Components 5
Network and Access Ports 5
Handset 5
Speaker 6
Monitor Mode 6
Group Listen Mode 6
Headset 7
Audio Quality Subjective to User 8