Cisco Catalyst 2950 Hardware Installation Guide

A-1
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
APPENDIX
A
Technical Specifications
Table A-1 through Table A-5 list the technical specifications for the
Catalyst 2950 switches. Table A-6 lists the technical specifications for fiber-optic
uplink ports.
Table A-7 lists the regulatory agency approvals for the switches other than the
Catalyst 2950 Long-Reach Ethernet (LRE) switches. Table A-8 and Table A-9 list
the regulatory agency approvals for the Catalyst 2950 LRE switches. Table A-10
lists the regulatory agency approval only for the Catalyst 2950G-24-EI-DC
switch.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz