Cisco Catalyst 2950 Hardware Installation Guide

xxv
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Preface
Obtaining Documentation
• Cisco RPS 675 Redundant Power System Hardware Installation Guide (order
number DOC-7815201=)
• Cluster Management Suite (CMS) online help (available only from the switch
CMS software)
• Course Wave Division Multiplexer (CWDM) Passive Optical System
Installation Note (not orderable but is available on Cisco.com)
• Installation Notes for the Catalyst Family Small-Form-Factor Pluggable
Modules (order number DOC-7815160=)
• Installation and Warranty Notes for the Cisco LRE 48 POTS Splitter (order
number DOC-7812250=)
• Installation Notes for Wall-Mount Brackets (order number DOC-7813035=)
Obtaining Documentation
Cisco provides several ways to obtain documentation, technical assistance, and
other technical resources. These sections explain how to obtain technical
information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation on the World Wide Web at
this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites from this URL:
http://www.cisco.com/public/countries_languages.shtml

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz