Cisco Catalyst 2950 Hardware Installation Guide

D-5
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Appendix D Translated Safety Warnings
Installation Warning
Installation Warning
Warning Read the installation instructions before connecting the system to the power
source.
Waarschuwing
Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron
aansluit.
Varoitus
Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention
Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung
Vor dem Anschließen des Systems an die Stromquelle die
Installationsanweisungen lesen.
Figyelem!
Mielõtt áramforráshoz csatlakoztatná a rendszert, olvassa el az üzembe
helyezési útmutatót!
Avvertenza
Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel
Les installasjonsinstruksjonene før systemet kobles til strømkilden.

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz