Cisco Catalyst 2950 Hardware Installation Guide

xxiii
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Preface
Related Publications
Related Publications
These documents provide complete information about the switch and are available
from this URL:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/index.htm
You can order printed copies of documents with a DOC-xxxxxx= number from the
Cisco.com sites and from the telephone numbers listed in the “Ordering
Documentation” section on page xxvi.
• Release Notes for the Catalyst 2950 and Catalyst 2955 Switches (not
orderable but is available on Cisco.com)
• Release Notes for the Catalyst 2950 LRE Switches (not orderable but is
available on Cisco.com)

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz