Cisco Catalyst 2950 - 10;100 Ports

2-9
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Chapter 2 Overview
Front-Panel Description
Figure 2-11 Catalyst 2950SX-24 Switch
Figure 2-12 Catalyst 2950T-24 Switch
10/100 Ports
The 10/100 ports use RJ-45 connectors and twisted-pair cabling. The ports can
connect to these devices:
• 10BASE-T devices, such as workstations and hubs, through standard RJ-45
connectors and two twisted-pair cabling. You can use Category 3, 4, or 5
cabling.
• 100BASE-TX devices, such as high-speed workstations, servers, hubs,
routers, and other switches, through standard RJ-45 connectors and two or
four twisted-pair, Category 5 cabling.
10/100 ports
1000BASE-SX ports
74516
S
YST
R
PS
DU
PLX
M
O
DE
S
PE
ED
U
TIL
STAT
10BASE-T / 100BASE-TX
1000BASE-SX
Catalyst 2950
SER
IE
S
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
13x
14x
15x
16x
17x
18x
19x
20x
21x
22x
23x
24x
2
5
26
10/100 ports
10/100/1000 ports
47337
SY
ST
RP
S
DU
PLX
M
O
D
E
S
PE
ED
UT
IL
S
TAT
10Base-T / 100Base-TX
10/100/100Base-T
Catalyst 2950
S
ERIES
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
1
1x
12x
13x
14x
15x
16x
17x
18x
19x
20x
21x
22x
23x
24x
1
2