Cisco Catalyst 2950 Hardware Installation Guide

A-9
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-05
Appendix A Technical Specifications
Table A-9 Catalyst 2950ST-24 LRE 997 Switch Agency Approvals
Safety EMC
UL/CSA 60950, 3rd edition USA CFR47, FCC, Part 15, Class A
IEC 60950 with Amendments A1 through
A4 and A11
ICES-003, Class A
AS/NZS 3260 with Amendments A1
through A4
EN55022/CISPR22, Class A, 1998
TUV-GS to EN60950 with Amendments
A1 through A4 and A11
EN 55024: ITE Immunity Standard. (CE Mark), 1998
CE EN61000-4-2/IEC1000-4-2: Immunity to ESD
EN61000-4-3/IEC1000-4-3: Immunity to Radio Frequency
Electromagnetic Fields
EN61000-4-4/IEC1000-4-4: Immunity to Electrical Fast
Transients
EN61000-4-5/IEC1000-4-5: Immunity to Power Line
Transients (Surges)
EN61000-4-6/IEC1000-4-6: Immunity to Radio Frequency
Induced Conducted Disturbances
EN61000-4-11/IEC1000-4-11: Immunity to Voltage Dips,
Voltage Variations, and Short Voltage Interruptions
Table A-10 Catalyst 2950G-24-EI-DC Switch Agency Approvals
NEBS
Bellcore GR-1089-CORE
Bellcore GR-63-CORE
Bellcore SR-3580 Level 3

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz