2-75
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
boot manual
boot manual
Use the boot manual global configuration command on a standalone switch to enable manually booting
the switch during the next boot cycle. Use the no form of this command to return to the default setting.
boot manual
no boot manual
Syntax Description This command has no arguments or keywords.
Defaults Manual booting is disabled.
Command Modes Global configuration
Command History
Usage Guidelines This command works properly only from a standalone switch in a stack.
The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot up the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see
Appendix A “Catalyst 3750-X and 3560-X Switch Boot Loader Commands.”
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.
To Next Page
Loading...
Need help?
General