2-659
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show location
show location
Use the show location user EXEC command to display location information for an endpoint.
show location admin-tag | [ | {begin | exclude | include} expression]
show location civic-location {identifier id number | interface interface-id | static} | {begin |
exclude | include} expression]
show location elin-location {identifier id number | interface interface-id | static} | {begin |
exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Use the show location command to display location information for an endpoint.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
admin-tag Display administrative tag or site information.
civic-location Display civic location information.
elin-location Display emergency location information (ELIN).
identifier id Specify the ID for the civic location or the elin location. The id range
is 1 to 4095.
interface interface-id Display location information for the specified interface or all
interfaces. Valid interfaces include physical ports.
static Display static configuration information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General