C-39
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform spanning-tree
show platform spanning-tree
Use the show platform spanning-tree privileged EXEC command to display platform-dependent
spanning-tree information.
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
synchronization
[detail | vlan
vlan-id]
Display spanning-tree state synchronization information. The keywords have
these meanings:
• detail—(Optional) Display detailed spanning-tree information.
• vlan vlan-id—(Optional) Display VLAN switch spanning-tree information
for the specified VLAN. The range is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General