EasyManua.ls Logo

Cisco Catalyst 3560X-24P

Cisco Catalyst 3560X-24P
1188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-546
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show controllers ethernet phy macsec
show controllers ethernet phy macsec
Use the show controllers ethernet phy macsec privileged EXEC command to display the internal
Media Access Control Security (MACsec) counters or registers on the switch or the specified interface.
show controllers ethernet [interface-id] phy macsec {counters | registers} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The displayed information is useful s for Cisco technical support representatives troubleshooting the
switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example output from the show controllers ethernet phy macsec counters command:
Switch# show controllers ethernet g1/0/1 phy macsec counters
GigabitEthernet1/0/1 (gpn: 1, port-number: 1)
-----------------------------------------------------------
========== Active RX SA ==========
ILU Entry : 1
SCI : 0x1B2140EC4C0000
AN : 0x0000
NextPN : 0x0013
Decrypt Key : 0x1E902BE3AF08549BAC995474C5F55526
---------- RX SA Stats ----------
IGR_HIT : 0xE
IGR_OK : 0xE
IGR_UNCHK : 0x0
IGR_DELAY : 0x0
interface-id (Optional) The physical interface.
counters Displays the status of the internal counters on the switch physical layer device
(PHY) for the device or the interface.
registers Displays the status of the internal registers on the switch PHY for the device or
the interface.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.

Table of Contents

Other manuals for Cisco Catalyst 3560X-24P

Related product manuals