Cisco Catalyst 3560X-24P User Manual

2-936
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
vmps retry
vmps retry
Use the vmps retry global configuration command on the switch stack or on a standalone switch to
configure the per-server retry count for the VLAN Query Protocol (VQP) client. Use the no form of this
command to return to the default setting.
vmps retry count
no vmps retry
Syntax Description
Defaults The default retry count is 3.
Command Modes Global configuration
Command History
Examples This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Related Commands
count Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.

Cisco Catalyst 3560X-24P Specifications

General

Brand	Cisco
Model	Catalyst 3560X-24P
Category	Switch
Language	English