C-17
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform ip wccp
show platform ip wccp
Use the show platform ip wccp privileged EXEC command to display platform-dependent Web Cache
Communication Protocol (WCCP) information.
show platform ip wccp {detail | label} [ | {begin | exclude | include} expression]
Note This command is available only if your switch is running the IP services feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
detail Display the platform WCCP details.
label Display the platform WCCP labels.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General