C-3
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform backup interface
show platform backup interface
Use the show platform backup interface privileged EXEC command to display platform-dependent
backup information used in a Flex Links configuration.
show platform backup interface [interface-id | dummyQ] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
interface-id (Optional) Display backup information for all interfaces or the specified
interface. The interface can be a physical interface or a port channel.
dummyQ (Optional) Display dummy queue information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General