2-102
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear lacp
clear lacp
Use the clear lacp privileged EXEC command on the switch stack or on a standalone switch to clear
Link Aggregation Control Protocol (LACP) channel-group counters.
clear lacp {channel-group-number counters | counters}
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all counters by using the clear lacp counters command, or you can clear only the counters
for the specified channel group by using the clear lacp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear lacp counters
This example shows how to clear LACP traffic counters for group 4:
Switch# clear lacp 4 counters
You can verify that the information was deleted by entering the show lacp counters or the show lacp 4
counters privileged EXEC command.
Related Commands
channel-group-number (Optional) Channel group number. The range is 1 to 48.
counters Clear traffic counters.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show lacp Displays LACP channel-group information.
To Next Page
Loading...
Need help?
General