2-613
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show ip dhcp snooping database
show ip dhcp snooping database
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]
This command is available only if your switch is running the IP services feature set.
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts : 0 Startup Failures : 0
Successful Transfers : 0 Failed Transfers : 0
Successful Reads : 0 Failed Reads : 0
Successful Writes : 0 Failed Writes : 0
Media Failures : 0
detail (Optional) Display detailed status and statistics information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
